North Oakville
View Floorplans
Site Plan
Amenities
Features + Finishes
VR1 - Maple Model
VR2 - Oak Park Model
Photo Gallery
COVID Disclosure Form
North Oakville
New Homes in Oakville
36’, 38’, 41’, 43’ & 45’ Singles

Features + Finishes

Choose Your Collection
Premium Features - 36’ Singles
Premium Features - 38’ Singles
Premium Features - 41’ Singles
Premium Features - 43’ Singles
Premium Features - 45’ Singles
Signature Features - 36’ Singles
Signature Features - 38’ Singles
Signature Features - 41’ Singles
Signature Features - 43’ Singles
Signature Features - 45’ Singles

Signature Collection

Exterior Construction Details

  1. Exterior walls to be brick cladded, with accent details in other materials, as per Vendor’s predetermined architectural colour schemes and as per plan.
  2. Exterior paint colour as per Vendor’s predetermined colour schemes.
  3. Self-sealing roof shingles and/or metal roof (as per plan) from Vendor’s predetermined colour schemes.
  4. Maintenance free aluminium and/or vinyl soffits, fascia, eavestroughs and downspouts.
  5. Approximately 8’ high exterior front entry door(s) with grip set.
  6. Exterior light fixtures on front elevation, as per model type.
  7. Professionally graded and sodded lot.
  8. Precast slab walkways and steps as required with six precast slabs at rear patio door.
  9. Asphalt paved driveway (Vendor not responsible for future settlement).
  10. R-60 attic insulation, exterior wall insulation and basement wall insulation as per Ontario Building Code requirements.
  11. Cold cellar and poured concrete porch, as per model type.
  12. Reinforced poured concrete garage floor.
  13. 9’ high, 10” wide poured concrete basement walls with damp proofing and foundation collector drains. Drainage layer provided on exterior of basement walls to enhance overall water resistance.
  14. Steel beam support as required in basement.
  15. Doors and windows sealed with high quality caulking.

Interior Finishes

  1. Ceiling height approximately 10’0” on main floor and 9’0” on second floor, as per model type.
  2. Stained oak main staircase (veneer risers and stringers) with “Signature-level” handrails and spindles. Stairway railings to be mounted on oak nosings in platformed area(s), as per model type. Platform(s) and landing(s) to be completed with stained pre-finished engineered oak flooring (approximately 5” wide) chosen from Vendor’s selected samples, as per model type.
  3. Choice of “Cambridge” two panel style or “Contemporary” flat slab style doors throughout, as per plan.
  4. Choice of paint grade “Signature-level” or “Contemporary” trim on all doors and arches.
  5. 8’ semi-solid wood passage doors on main floor.
  6. Any pass through on main floor to be trimmed, as per plan.
  7. 4” casing and 7 1/2” solid white poplar baseboard throughout all finished areas.
  8. All interior walls to be finished with premium acrylic latex paint. Wood trim and doors painted with semi-gloss white paint. Purchaser to have choice of one (1) wall colour throughout chosen from Vendor’s selected samples.
  9. Smooth ceiling(s) throughout all finished areas.
  10. Coffered ceilings, where shown, as per model type.
  11. All interior door hardware to be “Signature-level” lever type in satin nickel colour finish.
  12. Laundry area complete with base cabinet(s) (except in 38’ Series Models 2126 and 2326), stainless steel tub and connections for water and drain, as per model type and chosen from Vendor’s selected samples.
  13. Direct vent natural gas fireplace with decorative mantel painted white, as per model type.

Kitchen Specifications

  1. “Signature-level” cabinetry with extended height upper cabinets with “Signature-level” granite countertops complete with undermount double bowl stainless steel sink with washerless single lever faucet, selected from Vendor’s standard samples, as per plan.
  2. Fully integrated appliance package including 36” ‘Sub-Zero’ fridge, 24” ‘Asko’ dishwasher, choice of 36” ‘Wolf’ 6 burner natural gas range with 30” ‘Wolf’ microwave with matching trim kit OR 36” ‘Wolf’ natural gas cook top with 30” ‘Wolf’ wall oven and 30” ‘Wolf’ wall microwave with matching trim kit chosen from Vendor’s predetermined package.
  3. “Signature-level” ceramic tile backsplash, selected from Vendor’s standard samples, as per plan.
  4. Choice of ‘Wolf’ Stainless Steel 36” exhaust hood fan OR custom quality cabinetry canopy hood fan over range/cooktop with 8” ducting to exterior chosen from Vendor’s predetermined package.

Bathroom Finishes

  1. “Signature-level” cabinetry chosen from Vendor’s selected samples in all bathrooms and powder room, as per model type.
  2. “Signature-level” granite countertops, chosen from Vendor’s selected samples.
  3. Wall mirrors in all bathrooms.
  4. All bathroom plumbing fixtures to be white.
  5. “Signature-level” ceramic wall tiles, chosen from Vendor’s selected samples, installed in tub and shower enclosures up to and including ceiling, as per model type, excluding freestanding tubs.
  6. Bathtub in main bathroom and bathtub or shower stall in secondary ensuites, as per model type.
  7. Natural finish pre-finished engineered oak flooring (approximately 3” wide) on main floor non-tiled areas, as per model type.
  8. Plush 40 oz. broadloom with quality 12mm foam underpad installed wall to wall on second floor non-tiled areas, as per plan. One colour selection throughout available from Vendor’s standard samples.
  9. 41’, 43’ and 45’ series designs feature natural finish pre-finished engineered oak flooring (approximately 3” wide) on second floor hallway, as per model type.
  10. Ceramic tile floor in designated areas fromVendor’s standard samples, as per model type.
  11. Engineered sub-floor system.
  12. All sub-floors will be glued and fastened withscrews.
  13. Temperature and pressure control single lever faucet on all showers, as per model type.
  14. Frameless clear glass door and panel with recessed shower light in separate shower stall, as per model type.
  15. Master ensuite with freestanding tub, frameless clear glass door/enclosure and recessed shower light in separate shower stall, as per model type.

Flooring Features

  1. Stained pre-finished engineered oak flooring (approximately 5” wide) on main and second floor non-tiled areas, as per model type.
  2. 12”x24” porcelain tile floor in designated areas from Vendor’s standard samples, as per model type.
  3. Engineered sub-floor system.
  4. All sub-floors will be glued and fastened with screws.

Doors and Windows

  1. Vinyl casement (vinyl awning for all for Elevation B designs), or thermo fixed glass windows with LOW-E glass throughout main and upper floors, as per model type.
  2. 8’ high metal insulated exterior front entry door(s) with grip set and weatherstripping.
  3. Elevation B to receive 8’ high fiberglass insulated front entry door(s) with grip set and weatherstripping.
  4. Metal insulated roll up garage door(s) approximately 8’ high.
  5. Metal insulated door from garage to house, as per plan, where permitted.
  6. Garden door provided at rear of home on the main floor, as per model type (no screens are included, nor available).

Electrical And Lighting Details

  1. 200 amp electrical service with breaker panel and copper wiring throughout.
  2. Quality light fixtures provided throughout, including ceiling light fixtures in all bedrooms, family room and decorative wall mounted fixture in powder room.
  3. Twelve (12) pot lights throughout main floor, with three (3) dimmer switches, as per purchaser selected locations.
  4. Electrical outlet(s) provided in garage along with waterproof exterior outlets near all exterior doors, excluding door from house to garage.
  5. Rough-in RG6, or equivalent, cable T.V. to three (3) locations as per purchaser selection.
  6. Rough-in for category 5, or equivalent, voice/data wiring to three (3) locations as per purchaser selection.
  7. Door chime provided.
  8. One carbon monoxide detector and electronic smoke detectors installed in basement, on main and upper floor, including all bedrooms.
  9. Rough-in for central vacuum.
  10. ‘Decora’ switches and plugs.
  11. One (1) garage door opener per roll-up door as per model type.

Mechanical Specification

  1. Natural gas forced air “High Efficiency” furnace with ECM motor controlled by “Smart” thermostat.
  2. Installed energy recovery ventilator (ERV) with separate wall control for improved indoor air quality.
  3. Installed rental gas hot water heater.
  4. Barbecue gas line to rear of home with disconnect and valve, ready to use, location determined by Vendor.
  5. Central Air Conditioning Unit.
  6. Rough-in drains for future three piece bathroom in basement, as per model type.

* North Oakville Comfort And Technology

  • Cool – Learning Thermostat to control your “High Efficiency” furnace
  • Efficient – LED lighting throughout the interior of your Dwelling, excluding the basement.
  • Additional attention and care Features:
    • At North Oakville, all model designs have been reviewed and assessed by an independent certified Energy Evaluator who has been certified and registered through NRCan (National Resources Canada). Each house model will be built to current Ontario Building Code requirements. Once the Dwelling is completed and just prior to closing, the same certified Energy Evaluator will return to the Dwelling to verify the air tightness thereof.
      • All paints to be low VOC,
      • All exhaust fans to be low sone for peaceful operation,
      • Shut-off valves on all hot and cold water lines on sinks and toilets,
      • 2 x 6 wall construction with R22 batt insulation – plus R5 rigid insulation,
      • HRV with smart control for improved air quality,
      • Electronically commutated furnace motors (ECMs), and
      • Water-Efficient toilets, vanity faucets and shower heads.
Download Features PDF +

Premium Collection

Exterior Construction Details

  1. Exterior walls to be brick cladded, with accent details in other materials, as per Vendor’s predetermined architectural colour schemes and as per plan.
  2. Exterior paint colour as per Vendor’s predetermined colour schemes.
  3. Self-sealing roof shingles and/or metal roof (as per plan) from Vendor’s predetermined colour schemes.
  4. Maintenance free aluminium and/or vinyl soffits, fascia, eavestroughs and downspouts.
  5. Approximately 8’ high exterior front entry door(s) with grip set.
  6. Exterior light fixtures on front elevation, as per model type.
  7. Professionally graded and sodded lot.
  8. Precast slab walkways and steps as required with six precast slabs at rear patio door.
  9. Asphalt paved driveway (Vendor not responsible for future settlement).
  10. Attic insulation, exterior wall insulation and basement wall insulation as per Ontario Building Code requirements.
  11. Cold cellar and poured concrete porch, as per model type.
  12. Reinforced poured concrete garage floor.
  13. Poured concrete basement walls with damp proofing and foundation collector drains. Drainage layer provided on exterior of basement walls to enhance overall water resistance.

Interior Finishes

  1. Ceiling height approximately 10’0” on main floor and 9’0” on second floor, as per model type.
  2. Natural finish oak main staircase (veneer risers and stringers) with “Premium –level” handrails and spindles, as per plan. Stairway railings to be mounted on oak nosings in platformed area(s), as per model type. Platform(s) and landing(s) to be completed with natural pre-finished engineered oak flooring (approximately 3” wide), as per model type.
  3. Choice of “Cambridge” two panel style or “Contemporary” flat slab style doors throughout, as per plan.
  4. Choice of paint grade “Premium-level” or “Contemporary” trim on all doors and arches.
  5. All interior doors on main floor to be approximately 8’0” high.
  6. Any pass through on main floor to be trimmed, as per plan.
  7. All interior walls to be finished with premium acrylic latex paint*. Wood trim and doors painted with semi-gloss white paint. Purchaser to have choice of one (1) wall colour throughout chosen from Vendor’s selected samples.
  8. Smooth ceiling finish throughout main floor, all main and second floor laundry areas and washrooms, as per model type. Stippled ceilings with smooth borders on second floor, as per model type.
  9. Coffered ceilings, where shown, as per model type.
  10. All interior door hardware to be “Premium-level” lever type in satin nickel colour finish.
  11. Laundry area complete with base cabinet(s) (except in 36’ Series Models 2570 and 2686 and in 38’ Series Models 2126 and 2326) and stainless steel tub and connections for water and drain, as per model type and chosen from Vendor’s selected samples.
  12. Direct vent natural gas fireplace with decorative mantel painted white, as per model type.

Kitchen Specifications

  1. “Premium-level” cabinetry with extended height upper cabinets with “Premium-level” granite countertops complete with undermount double bowl stainless steel sink with washerless single lever faucet, chosen from Vendor’s selected samples, as per plan.
  2. “Premium-level” ceramic tile backsplash, chosen from Vendor’s selected samples, as per plan.
  3. Exhaust hood fan over stove with 6” ducting to exterior.
  4. Heavy duty plug receptacle provided for stove.
  5. Designated dishwasher space with rough-in electrical- plumbing for future dishwasher.

Bathroom Finishes

  1. “Premium-level” cabinetry chosen from Vendor’s selected samples in all bathrooms and powder room, as per model type.
  2. Wall mirrors in all bathrooms.
  3. All bathroom plumbing fixtures to be white.
  4. 8”x10” ceramic wall tiles, chosen from Vendor’s selected samples, installed in tub and shower enclosures up to and including ceiling, as per model type, excluding freestanding tubs.
  5. Exhaust fan in all bathrooms*.
  6. Bathtub and separate shower stall in master ensuite, as per model type.
  7. Bathtub in main bathroom and bathtub or shower stall in secondary ensuites, as per model type.
  8. Temperature and pressure control single lever faucet on all showers, as per model type.
  9. Framed clear glass door and recessed shower light in separate shower stall, as per model type.
  10. Master ensuite with frameless clear glass door/enclosure and recessed shower light, as per model type.

Flooring Features

  1. Natural finish pre-finished engineered oak flooring (approximately 3” wide) on main floor non-tiled areas, as per model type.
  2. Plush 40 oz. broadloom with quality 12mm foam underpad installed wall to wall on second floor non-tiled areas, as per plan. One colour selection throughout chosen from Vendor’s selected samples.
  3. 41’, 43’ and 45’ series designs feature natural finish pre-finished engineered oak flooring (approximately 3” wide) on second floor hallway, as per model type.
  4. Ceramic tile floor in designated areas chosen from Vendor’s selected samples, as per model type.
  5. Engineered sub-floor system.
  6. All sub-floors will be glued and fastened with screws.

Doors and Windows

  1. Vinyl casement (vinyl awning for all for Elevation B designs), or thermo fixed glass windows with LOW-E glass throughout main and upper floors, as per model type. High quality basement windows, with LOW-E glass.
  2. Screens on all operational windows.
  3. Metal insulated (Elevation B designs to receive Fiberglass insulated) front entry door(s) with high quality weatherstripping.
  4. Roll up garage door(s) approximately 8’ high.
  5. Metal insulated door from garage to house, as per plan, where permitted.
  6. Garden door provided at rear of home on the main floor, as per model type (no screens are included, nor available).

Electrical And Lighting Details

  1. 200 amp electrical service with breaker panel and copper wiring throughout.
  2. Quality light fixtures provided throughout, including ceiling light fixtures in all bedrooms, family room and decorative wall mounted fixture in powder room, as per model type.*
  3. Electrical outlets provided in garage along with waterproof exterior outlets near all exterior doors, excluding door from house to garage.
  4. Heavy duty receptacle and wiring provided for clothes dryer.
  5. Rough-in RG6, or equivalent, cable T.V. in great room, den/office/media and master bedroom, as per model type.
  6. Door chime provided.
  7. Electronic smoke detectors installed in basement, on main and upper floor, including all bedrooms.
  8. All bathroom electrical duplex receptacles protected by ground fault interrupter.
  9. Rough-in for central vacuum.
  10. Rough-in for category 5, or equivalent, voice/data wiring in master bedroom, kitchen and den/office, as per model type.
  11. “Decora” switches and plugs.
  12. One ceiling mounted electrical outlet for future garage door opener(s).
  13. Rough-in electric car charger ready conduit in garage.

Mechanical Specification

  1. Natural gas forced air “High Efficiency” furnace with ECM motor controlled by a learning thermostat.*
  2. Installed heat recovery ventilator (HRV) with separate wall control for improved indoor air quality.
  3. Installed rental gas hot water heater.
  4. 41’, 43’ and 45’ series designs feature barbecue gas line to rear of home with disconnect and valve, location determined by Vendor.
  5. One water tap provided in garage and one on exterior.
  6. Single lever faucets on all bathrooms and powder room sinks.
  7. One carbon monoxide detector.
  8. Ducts professionally cleaned prior to Closing.
  9. Rough in drains for future three piece bathroom in basement.

* North Oakville Comfort And Technology

  • Cool – Learning Thermostat to control your “High Efficiency” furnace
  • Efficient – LED lighting throughout the interior of your Dwelling, excluding the basement.
  • Additional attention and care Features:
    • At North Oakville, all model designs have been reviewed and assessed by an independent certified Energy Evaluator who has been certified and registered through NRCan (National Resources Canada). Each house model will be built to current Ontario Building Code requirements. Once the Dwelling is completed and just prior to closing, the same certified Energy Evaluator will return to the Dwelling to verify the air tightness thereof.
      • All paints to be low VOC,
      • All exhaust fans to be low sone for peaceful operation,
      • Shut-off valves on all hot and cold water lines on sinks and toilets,
      • 2 x 6 wall construction with R22 batt insulation – plus R5 rigid insulation,
      • HRV with smart control for improved air quality,
      • Electronically commutated furnace motors (ECMs), and
      • Water-Efficient toilets, vanity faucets and shower heads.
Download Features PDF +
Registration Form

Communities I am interested in: